Resiblock 22
Resiblock 22 matt paving sealer is a urethane based low viscosity prepolymer in Hydrocarbon solvents. Its function is to penetrate jointing sand and bind the particles together and to the sides of the pavers. Resiblock 22's penetration comes about by solvent evaporation, and polymerisation is created by the atmospheric and residual moisture effecting the cure. The resulting effect is an in-situ bond and stabilisation of the pavement that retains its normal flexural properties. Resiblock 22 matt paving sealer is manufactured under the jurisdiction of ISO 9001.
• Suitable for use on both concrete and clay pavers.
• Strengthen pavement
• Unaffected by water or ice
• Reduce paver loosening and creep
• Prevent serious damage to bedding by freeze/thaw cycle
• Prevents infiltration of water
• Approved for petrol station forecourts and airfields
• Unaffected by commercial de-icing salts
• Will withstand temperatures in excess of 200oC
|
BENEFITS
- Prevent sand being removed by vacuum sweepers.
- Prevent loss of sand in areas liable to flood.
- Prevent sand loss by propeller wash and jet blast.
- Prevent potential explosion hazard from fuel spillage's accumulating in the laying course.
- Prevent blocks from spalling, cracking and settling by heavy traffic after use.
- Retain characteristic flexibility of paving (Resiblock sealers are Elastomeric).
- Retain jointing sand to provide block interlock.
- Suitable for areas that have severely channelised traffic.
- Sealing of joints prevents contamination of groundwater by Hydrocarbons.
- Will act as a surface sealant on most types of wet-cast paving (eg patio slabs).
|
|
03 313-1944